Rigol DS1000B Manuel d'utilisateur télécharger pdf (Page 30)

RIGOL

Quick Guide for DS1000B Series

ENGLISH

How to Connect Power Cord

After inspecting the instrument and the accessories, connect the

power cord as shown in the following figure.

Turn on the switch which is under the power socket, the instrument

then is powered on, and the power key on the front pannel is lit up

(twinkle like breathing)，press the key to start up the instrumemt.

If unable to power the instrument, take the following steps:

(1) Check the power cord connection;

(2) Check if the power switch on the rear pannel has been turn on;

(3) If the above inspections, the power key on the front pannel is

not lit, please take out the fuse and check, refer to the fuse

specification shown in the User’ Guide to change the fuse if

needed.

(4) After the above inspections, the power key on the front pannel

is still not lit, please contact RIGOL for help.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Rigol DS1000B Manuel d'utilisateur Page 30