Rigol DS6000 Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Instruments de mesure Rigol DS6000 Series. RIGOL DS6000 Series User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1X: DC~7MHz
10X: DC~150MHz
1X: 50ns
10X: 2.3ns
CAT II:IEC Measurement Category II. Inputs may be connected to mains (up to 300 VAC)
under Category II overvoltage conditions.
Cable Length
Ground Alligator Clip
©2007 RIGOL Technologies, Inc. All Rights Reserved.
1X: 1M 2
Ω
Ω±
10X: 10MΩ±2%
1X: 100pF 20pF±
10X: 17pF±5pF
1X: CAT II 150V AC
10X: CAT II 300V AC
Frequency Compensation
Before taking any measurements using a probe first check the
compensation of the probe and adjust it to match the channel
inputs.
-
.
,
Generally, the oscilloscope provides a calibration signal output
terminal at the front panel. Connect the probe to the signal output
terminal to display a square waveform on the oscilloscope and set the
probe attenuation to 10X.Adjust trimmer until seeing flat top square
wave on the display
Hook Tip
Maker Rings( yellow
)
, Pink,
light blue and dark blue
使
R I G OL
线
800 810 0002 400 620 0002
www.rigol.com
Contact Us
If you have any problem or requirement when using
our products, please contact RIGOL Technologies,
Inc. or your local distributors, or
visit: www.rigol.com.
Vue de la page 0
1 2

Résumé du contenu

Page 1

1X: DC~7MHz10X: DC~150MHz1X: 50ns10X: 2.3nsCAT II:IEC Measurement Category II. Inputs may be connected to mains (up to 300 VAC) under Category II ov

Page 2 - frequency response

BNC Connector: Connect to the oscilloscope measuring channel.Ground Spring: Connect to the probe head for grounding and better high freque

Modèles reliés DS1000B | DS1000D | DS1000E |

Commentaires sur ces manuels

Pas de commentaire