Rigol M300 Manuel d'utilisateur télécharger pdf (Page 58)

RIGOL

User’s Guide for DM3000 Series

2-10

Frequency Measurement

Frequency measurement function is used for measuring the frequency of AC signal

(voltage and current) only.

Press  Freq, the display shows:

Figure 2- 7 Enable or Disable the AC Frequency measurement

Table 2- 7 Menu Description

Function

Description

Enable the Frequency Measurement of the AC

signal

OFF

Disable the Frequency Measurement of the AC

signal

Save all changes, back to a higher level menu.

Basic measurement:

1. Connect test leads as shown in Figure 2-8 (or Figure 2-9); red test lead to the HI

Terminal, black test lead to the LO Terminal.

2. Press (or ) to select the AC voltage or current measurement function.

3. Choose the appropriate range.

4. Set up the AC Frequency Measurement.

Press  Freq  On, to start the AC Frequency Measurement.

Press to save all changes, back to a higher level menu.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 143 144

Pas de commentaire

Rigol M300 Manuel d'utilisateur Page 58