Rigol DM3068 Guide de l'utilisateur télécharger pdf (Page 82)

RIGOL Chapter 2 Front Panel Operations

User’s Guide for DM3068

2-40

Measurement Configuration

Most measurement parameters are user-defined. Changing a measurement

parameter will change the measurement precision and speed as well as the input

impedance. An appropriate measurement parameter based on the actual

application will ensure faster measurement or higher measurement precision.

The default measurement configurations of the multimeter can ensure the

accuracy of the measurement results in most cases. Users can directly use these

defaults for any measurement or modify the parameters of the measurement

function as required.

The parameters for different measurement function differ, see table below.

Table 2-5 Measurement parameter

Functions Parameters

DCV integration time, DC impedance, Auto zero (AZ)

ACV AC filter

DCI integration time, Auto zero (AZ)

ACI AC filter

OHM (2WR, 4WR) Integration time, Auto zero (AZ),

Offset compensation

(OC)

CAP N/A

CONT Short-circuit resistance

DIODE Current Source

FREQ/PREIOD Gate time, AC filter

SENSOR N/A

To set the measurement parameter, select a measurement function and then press

. For more details, please refer to the following content.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 170 171

Pas de commentaire

Rigol DM3068 Guide de l'utilisateur Page 82