Rigol DS6000 Series Manuel d'utilisateur télécharger pdf (Page 36)

RIGOL

6 RP7000S User’s Guide

Active Probe Amplifier

The active probe amplifier (Figure 2), with more than 1.5GHz bandwidth, is a

main component of the active probe. One end of the active probe amplifier can

be connected to the DS6000 and DS4000 series oscilloscope and the other end

can be connected to the desired probe head.

Figure 2 Active Probe Amplifier

When connecting a probe head to an active probe amplifier, push it

straight in. For single-ended probe, when connecting them, pay attention to

their polarities. If the polarity is reversed, the performance of the active probe

would reduce and the active probe might even be damaged.

CAUTION

There are Pos/Neg markers on the hand-held single-ended probe

head and black mark sleeve on the negative pole of the solder-in

single-ended probe head.

+ -

Pos/Neg Mark

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 48 49

Pas de commentaire

Rigol DS6000 Series Manuel d'utilisateur Page 36