Rigol DS6000 Series Manuel d'utilisateur télécharger pdf (Page 41)

RIGOL

RP7000S User’s Guide 11

3. Use any probe auxiliary device to connect the probe to the circuit to be

tested.

4. To disconnect the probe from the oscilloscope, press the button on the

probe (as shown in the left figure below), pull the connector straight out of

the oscilloscope (as shown in the right figure below) and then release the

button.

CAUTION

Do not twist the probe on the BNC connector of the oscilloscope,

or else, the probe might be damaged.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Pas de commentaire

Rigol DS6000 Series Manuel d'utilisateur Page 41