Rigol DM3064 Guide de l'utilisateur télécharger pdf (Page 40)

RIGOL

User’s Guide for DM3000 Series

1-28

To Measure Sensor

The DM3000 converts the sensor physical properties into electrical voltage,

resistance, current for measurement. So it needs the sensor name, sensor type,

sensor physical unit, sensor reference data, and arithmetic.

Figure 1- 37

Table1- 12 Sensor Building Options

New Newly built sensor reference data file

Edit Edit a sensor reference data file

Load Load a sensor reference data file

Display Set display mode

Steps:

1. Connect test leads as shown in

Figure 1- 54, Figure 1- 55, red test leads to the

HI Terminal, black test leads to the LO Terminal.

2. Press

to select the Sensor function.

3. Press New, the display shows:

Figure 1- 38

(1). In New function interface, press Prpty to edit the sensor Name, sensor Type and

physical characteristics of the sensor.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 157 158

Pas de commentaire

Rigol DM3064 Guide de l'utilisateur Page 40