Rigol DM3064 Guide de l'utilisateur télécharger pdf (Page 66)

RIGOL

User’s Guide for DM3000 Series

2-16

2. Limit Measurement

Use the Limit test function to perform pass/fail testing with respect to specified

upper and lower limits. The limits can be set to any value between 0 and ±120% of

the highest range of the current function. The upper limit must be positive than the

lower limit.

Press Æ Limit, the display shows:

Figure 2- 15

Table 2- 12 Limit Measurement Menu Function Description

The range of Limit function:

(1). The limit value scope is 0%~±120% of the current measurement range.

(2). The upper limit value should be always bigger than the lower limit value.

Function

Settings Description

High Set the desired Upper limit.

Low Set the desired Lower limit.

Save all changes, back to a higher level menu.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 157 158

Pas de commentaire

Rigol DM3064 Guide de l'utilisateur Page 66