Rigol DS1000D Manuel d'utilisateur télécharger pdf (Page 18)

RIGOL

User’s Guide for DS1000E, DS1000D Series

1-8

To Perform a Functional Check

Perform this quick functional check to verify that the instrument is operating

correctly.

1. Turn on the instrument.

 Use the power cord designed for the oscilloscope only.

 The power requirements are 100 to 240 VAC

RMS

, 45Hz to 440Hz.

 Turn on the instruments, and wait until the display shows the waveform window.

 Press the Storage button, select Storage in the menu. Rotate the multiple

function knob to select Factory and press the knob down. Then, press Load .

Figure 1- 9

Turn on and Check the instrument

WARNING:

To avoid electric shock, be sure the oscilloscope is properly grounded.

2. Input a signal to a channel of the oscilloscope

DS1000E series: 2 channels input + 1 external trigger channel input

DS1000D series: 2 channels input + 1 external trigger channel input +16 channels

digital input

Do the following steps:

① Set the switch on the probe to 10X and connect the probe to Channel1 on the

oscilloscope:

Power button

Storage button

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 165 166

Pas de commentaire

Rigol DS1000D Manuel d'utilisateur Page 18