Rigol DM3058 Manuel d'utilisateur télécharger pdf (Page 128)

RIGOL

Programming Guide for DM3058/DM3058E

4-35

[SENSe:]RESistance:RANGe? [MINimum|MAXimum] – Queries the current range

of 2-wire resistance measurement.

Both 2-wire and 4-wire resistance measurements are influenced by this command.

All the commands of 2-wire and 4-wire resistance will have influence over the

setting of resistance.

Return Format:

The query returns the range of 2-wire resistance measurement.

7. [SENSe:]FRESistance:RANGe

Command Format:

[SENSe:]FRESistance:RANGe {<range>|MINimum|MAXimum}

[SENSe:]FRESistance:RANGe? [MINimum|MAXimum]

Function:

The commands set and query the range of 4-wire resistance measurement.

Parameter:

Name Type Range Default

<range> Discrete {200 Ω|2 kΩ|20 kΩ|200 kΩ

|2 MΩ|10 MΩ|100 MΩ}

200 kΩ

Explanations:

[SENSe:]FRESistance:RANGe {<range>|MINimum|MAXimum} - Sets the desired

range of 4-wire resistance measurement from {200 Ω|2 kΩ|20 kΩ|200 kΩ|2

MΩ|10 MΩ|100 MΩ}; thereinto, MIN = 200 Ω, MAX = 100 MΩ and the unit is Ω. If

a 2 kΩ range is required, enter 2000 as its parameter.

[SENSe:]FRESistance:RANGe? [MINimum|MAXimum] – Queries the current

range of 4-wire resistance measurement.

Both 2-wire and 4-wire resistance measurements are influenced by this command.

All the commands of 2-wire and 4-wire resistance will have influence over the

setting of resistance.

Return Format:

The query returns the range of 4-wire resistance measurement.

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 191 192

Pas de commentaire

Rigol DM3058 Manuel d'utilisateur Page 128