Rigol DM3058 Manuel d'utilisateur télécharger pdf (Page 140)

RIGOL

Programming Guide for DM3058/DM3058E

4-47

26. [SENSe:]RESistance:NPLC

Command Format:

[SENSe:]RESistance:NPLC {0.02|0.2|1|10|100|MINimum|MAXimum}

[SENSe:]RESistance:NPLC? [MINimum|MAXimum]

Function:

The commands set and query the integration time for 2-wire resistance

measurement. The inputted and returned values are multiple of PLC.

Explanations:

[SENSe:]RESistance:NPLC {0.02|0.2|1|10|100|MINimum|MAXimum} – Sets the

desired integration time, MIN = 0.02 PLC, MAX = 100 PLC, and the default is 1

PLC.

[SENSe:]RESistance:NPLC? [MINimum|MAXimum] – Queries the current

integration time of 2-wire resistance measurement

The integration time relates to resolution and measurement rate, refer to Table

4-2.

Both 2-wire and 4-wire resistance measurements are influenced by this command.

All the commands of 2-wire and 4-wire resistance will have influence over the

setting of resistance.

Return Format:

The query returns the current integration time of 2-wire resistance measurement.

27. [SENSe:]FRESistance:NPLC

Command Format:

[SENSe:]FRESistance:NPLC {0.02|0.2|1|10|100|MINimum|MAXimum}

[SENSe:]FRESistance:NPLC? [MINimum|MAXimum]

Function:

The commands set and query the integration time for 4-wire resistance

measurement. The inputted and returned values are multiple of PLC.

Explanations:

[SENSe:]FRESistance:NPLC {0.02|0.2|1|10|100|MINimum|MAXimum} – Sets the

desired integration time, MIN = 0.02 PLC, MAX = 100 PLC, and the default is 1

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 191 192

Pas de commentaire

Rigol DM3058 Manuel d'utilisateur Page 140